* 厂家(产地): | 德国拜耳/泰国拜耳/上海拜耳 | * 牌号: | |
* 销售方式: | 品牌经销 | 备注说明: | 原厂正牌,货到付款 |
* 地区: | 全国 |
德国拜耳/泰国拜耳/上海拜耳PC/ABS FR110 原厂原包,货真价实,价格优惠,亲!~
专业供应PC+ABS塑胶原料:防火PC+ABS,阻燃PC+ABS,耐高温PC+ABS,耐热PC+ABS,抗冲击PC+ABS,食品级PC+ABS,高冲击PC+ABS,抗紫外线PC+ABS,低粘度PC+ABS,电镀级PC+ABS,加玻纤PC+ABS,耐低温PC+ABS,高流动PC+ABS,无卤PC+ABS,无溴PC+ABS,注塑级PC+ABS,等塑胶原料。
德国拜耳/泰国拜耳/上海拜耳PC/ABS FR110物性表
Physical | Value | Unit of Measure | Conditions | Test |
---|---|---|---|---|
Specific Gravity | 1.19 | sp gr | 23/23°C | ASTM D-792 |
Melt Flow Rate | 35 | g/10min | 300°C/1.2 kg - 0 | ASTM D-1238 |
Mold Shrink, Linear-Flow | 0.004 to 0.006 | in/in (cm/cm) | ASTM D-955 | |
Mechanical | Value | Unit of Measure | Conditions | Test |
Tensile Modulus | 380,000 (2.622) | psi (GPa) | ASTM D-638 | |
Tensile Stress @ Yield | 8,700 (60.03) | psi (MPa) | ASTM D-638 | |
Tensile Stress @ Break | 8,100 (55.89) | psi (MPa) | ASTM D-638 | |
Tensile Elongation @ Yield | 4.0 | % | ASTM D-638 | |
Tensile Elongation @ Break | 90 | % | ASTM D-638 | |
FlexuralModulus | 390,000 (2.691) | psi (GPa) | ASTM D-790 | |
Flexural Strength | 13,800 (95.22) | psi (MPa) | ASTM D-790 | |
Impact | Value | Unit of Measure | Conditions | Test |
Notched Izod Impact Strength | 14 (747.306) | ft-lbs/in (J/m) | 0.125" (3.2 mm), 73°F (22.7°C) | ASTM D-256 |
Instrumented Dart Impact Energy | 456 (51.528) | in/lbs (Joules) | 0.1000" (2.54 mm), 73°F (22.7°C) | ASTM D-256 |
Hardness | Value | Unit of Measure | Conditions | Test |
Rockwell Hardness | 122 | R Scale | ASTM D-785 | |
Thermal | Value | Unit of Measure | Conditions | Test |
Deflection Temp Under Load | 203 (95) | °F (C°) | 264psi (1.82 MPa) Unannealed | ASTM D-648 |
Deflection Temp Under Load | 212 (100) | °F (C°) | 66psi (0.46 MPa) Unannealed | ASTM D-648 |
Coefficient of Thermal Expansion | 4.3 e-005 | in/in/°F | ASTM D-696 | |
Vicat Softening Point | 226 (107.77) | °F (C°) | ASTM D-1525 | |
Flammability | Value | Unit of Measure | Conditions | Test |
LimitingOxygen Index | 30 | % | ASTM D-2863 | |
UL 94 Flame Class | Rating | 0.0590" (1.498mm) | UL 94 | |
UL 94 Flame Class | Rating | 0.0790" (2.0066mm) | UL 94 | |
UL 94 Flame Class | HB | Rating | 0.0790" (1.498mm) | UL 94 |
UL 94 Flame Class | HB | Rating | 0.1180" (2.997mm) | UL 94 |
UL 94 Flame Class | HB | Rating | 0.1180" (2.997mm) | UL 94 |
UL 746 | Value | Unit of Measure | Conditions | Test |
Relative Temp Index Mechanical | 185 (85) | °F (C°) | Non-Impact, 0.0620" (1.5748mm) | UL 746 |
Relative Temp Index Mech w/Impact | 185 (85) | °F (C°) | Impact, 0.0620" (1.5748mm) | UL 746 |
Relative Temp Index Electrical | 203 (95) | °F (C°) | 0.0620" (1.5748mm) | UL 746 |
Comparative Tracking Index | 300 | V | UL 746 | |
High Volt Arc Track Rate | 5.91 | in/min | 0.1180" (2.997mm) | UL 746 |
Hot Wire Ignition | 45 | Seconds | 0.0590" (1.498mm) | UL 746 |
Hot Wire Ignition | 90 | Seconds | 0.1180" (2.997mm) | UL 746 |
High Ampere Arc Ignition | 120 | Seconds | 0.0590" (1.498mm) | UL 746 |
Electrical | Value | Unit of Measure | Conditions | Test |
Dielectric Constant | 3.0 | @ 100 Hz, | ASTM D-150 | |
Dielectric Constant | 2.9 | @ 1 Mhz, | ASTM D-150 | |
Dielectric Strength | 760 | V/mil | Short time under oil @ 73°F (23°C) 0.062" (1.5748) | ASTM D-149 |
Dissipation Factor | 0.004 | @ 100 Hz, | ASTM D-150 | |
Dissipation Factor | 0.007 | @ 1 Mhz, | ASTM D-150 | |
Surface Resistivity | 1014 | ohms | ASTM D-257 | |
Volume Resistivity | 1015 | ohms-cm | Tinfoil Electrodes | ASTM D-257 |
Arc Resistance | 90 | seconds | 0.1180" (2.997mm) | ASTM D-257 |
Injection Molding Parameters | Value | Unit of Measure | Conditions | Test |
Drying Temperature | 175 to 210 (79.44 to98.88) | °F (C°) | ||
Drying Time | 3.0 to 4.0 | Hours | ||
Suggested Max Moisture | 0.020 | % | ||
Suggested Max Regrind | 20 | % | ||
Rear Temperature | 430 to 445 (221.11 to 229) | °F (C°) | ||
Middle Temperature | 435 to 455 (223.88 to 235) | °F (C°) | ||
Front Temperature | 445 to 465 (229 to240.55) | °F (C°) | ||
Nozzle Temperature | 485 to 505 (251.66 to 262.77) | °F (C°) | ||
Processing (Melt) Temperature | 430 to 520 (221.11 to 271.11) | °F (C°) | ||
Mold Temperature | 120 to 175 (48.88 to 79.44) | °F (C°) | ||
Injection Pressure (melt) | 10,000 to 20,000 (69 to 138) | psi (MPa) | ||
Back Pressure (melt) | 50 to 100 (344.74 to 963.9) | psi (KPa) | ||
Screw Speed | 50 to 100 | rpm | ||
Clamp Tonnage | 3.0 to 5.0 | Tons/in2 | ||
Screw L/D Ratio | 20:1 | Ratio | ||
Screw Compression Ratio | 2:1 to 3:1 | Ratio |